Do not generalise across processes
Cathode and anode materials, mixing, conveying, storage and other steps may have different oxygen, moisture, pressure and continuity requirements. Build a point-by-point duty list.
LITHIUM BATTERY
Lithium Battery & New-Energy Nitrogen Solutions
Gas quality and load defined separately for powder transfer, storage, inerting, process purging and continuous supply.
Process mapDuty separated
MoistureSite-specific
ContinuousLoad reviewed
ExpansionModular option
These are reference ranges from existing materials. Maximum flow and highest purity may not coincide. Confirm the model, feed conditions, dew-point basis and optional configuration in the project datasheet.
ENGINEERING NOTES
Define the duty before selecting equipment.
The following establishes a technical discussion framework. Final performance, scope, certification and acceptance criteria are defined in the agreed technical specification.
ENGINEERING SCHEMATIC
New-energy material nitrogen process map
The schematic clarifies the gas path and scope boundaries; final instruments, interlocks and layout follow the project specification.
01
Central generationInterface defined in specification
02
Gas-quality monitoringInterface defined in specification
03
Distribution headerInterface defined in specification
04
Powder transfer / storageInterface defined in specification
05
Expansion interfaceInterface defined in specification
Align safety and quality objectives
Process and EHS teams should jointly define inerting, dust risk, material sensitivity and product-quality targets, which drive analysis, interlocks and backup.
Expansion and continuity
Phased projects should reserve distribution, control and utility interfaces, with parallel trains, N+1 or external backup selected from the consequence of interruption.
Site and utility verification
Ambient temperature, altitude, dust or cleanliness, power, cooling, compressed air, space, logistics and local codes can change capacity, layout and scope.
Complete equipment and interface list
List compression and treatment, generation or membranes, purification, boosting, storage, analysis, venting, controls, communications, piping and installation interfaces rather than comparing generator price alone.
From FAT to stable production
Maintain continuity from factory testing and preservation through arrival inspection, SAT, training and operating trends. Contract and acceptance records govern final performance, responsibility and warranty.
Image information
This image explains equipment configuration and engineering processes; it is not a customer-site or acceptance record.
EQUIPMENT & DELIVERY
Build and inspect against agreed interfaces
Assembly follows controlled drawings and the equipment list. Review pipe supports, service access, electrical connections and instrumentation. Agree inspection items, test conditions and documents before manufacture. This manufacturing illustration is not evidence of a passed FAT.
Image information
This image explains equipment configuration and engineering processes; it is not a customer-site or acceptance record.
EQUIPMENT & DELIVERY
Measurement starts with the sampling point
Purity, residual oxygen and dew point are different specifications. Define the analyte, sampling location and pressure basis before choosing instruments, alarms and off-spec handling. The illustration explains the arrangement and contains no test readings.
SYSTEM BOUNDARY
A deliverable system makes every critical interface explicit.
01 Feed air→02 Air treatment→03 Gas separation→04 Analysis & storage→05 Process user
PAGE FAQ
Answer the critical questions before sizing.
What is the minimum information for a quotation?
Provide the process, average and peak flow, minimum purity, pressure, dew point, hours, environment, standards and target production date.
Can a standard model be used directly?
Standard modules may be the foundation, but train count, storage, treatment, controls and interfaces must be checked against the actual duty and site.
How is delivery risk reduced?
Write reference conditions, measurement method, sampling point, stabilisation, test duration, off-spec handling and responsibilities into the technical agreement.
CONTACT KEVIN
Tell us about your site.
Send Kevin your application, location and the data you have. We will work through the next steps together.
